Modern
industrial cleaning

PowerMaster

Gentle, powerful and low-waste cleaning

The new cleaning method is based on an environmentally friendly granulate, which is fed into a compressed air stream. The granulate is wetted with water shortly before it emerges from the nozzle in order to increase the kinetic energy. The surface is not attacked or only very slightly attacked by the soft granulate.

 

Compressed air consumption: minimum 6 m³/min. and 1 bar.
Water consumption: minimum 1 l/min.
Granulate consumption dependent on type of use.

Order number: MY-1308.00PM

PowerMaster procedure

PowerMaster cleans, decoats and desizes in a powerful and low-waste process. The cost-effective system operates at low pressure between 3 and – depending on the type of system – a maximum of 8 bar compressed air at a low water consumption of 1 to 2 litres per minute. Depending on the application, the jet velocity can be in the subsonic or supersonic range.

When using the blasting abrasives recomended by mycon, even polished stainless steel surfaces or light metal surfaces ca be cleaned or decoated without visible impairment of the metal surfaces. Foils, paints, varnishes or resins, greases, bituminous layers or release agents on moulds can be removed gently, quickly and economically with PowerMaster. PowerMaster can also be used for plastic surfaces.

 

PowerMaster can be equiped with special nozzles up to 160 mm width for cleaning large surfaces.

When cleaning lighter soiling, PowerMaster works without the addition of abrasives. Vehicles, vehicle rims, but also glass, plastics or building facades of any kind can be gently cleaned at high surface rates.

PowerMaster Innovation

 

PowerMaster cleans, decoats and desizes in a powerful and low-waste process.The cost-effective system operates at low pressure between 3 and – depending on the type of system – a maximum of 8 bar compressed air at a low water consumption of 1 to 2 litres per minute. Depending on the application, the jet velocity can be in the subsonic or supersonic range.

When using the blasting abrasives recomended by mycon, even polished stainless steel surfaces or light metal surfaces ca be cleaned or decoated without visible impairment of the metal surfaces. Foils, paints, varnishes or resins, greases, bituminous layers or release agents on moulds can be removed getly, quickly and economically with PowerMaster. PowerMaster can also be used for plastic surfaces.

 

 

PowerMaster can be equiped with special nozzles up to 160 mm width for cleaning large surfaces.

When cleaning lighter soiling, PowerMaster works without the addition of abrasives. Vehicles, vehicle rims, but also glass, plastics or building facades of any kind can be gently cleaned at high surface rates.

Application examples

Special waste container before cleaning with PowerMaster

Special waste container after cleaning with PowerMaster

Cleaning a heavily soiled plastic mold with PowerMaster

Cleaning of the clinker facade after fire damage with PowerMaster

Removal of parking space markings using PowerMaster