The duel: High-pressure cleaner* versus the JetMaster-system
The challenge: a completely blocked heat exchanger filled with glued residuesPlace of application: Kipp Umwelttechnik’s blasting hall *Performance data: 130 l/min, 150 bar High pressure cleaning In order to preserve delicate fins, the high-pressure cleaner is equipped with a flat film extrusion nozzle. The pump pressure was confined to 100 bar, so the delicate fins […]
Manual or automated cleaning of tube bundle heat exchangers and separate tubes
TubeMaster – gently, effectively and without water Mycon GmbH developed its purification process TubeMaster a long time ago. TubeMaster cleans small tubes with a diameter of approximately 50 mm, when using a special version even tubes with a diameter of 100 mm. This purification process even achieves better results than high pressure cleaning methods using […]
Effective for cleaning heat exchangers in the production of acetylene
TubeMaster AS in operation Cleaning attempts using extreme pressure cleaning with water of 2500 bar were unsuccessful – TubeMaster AS, however, was able to get the job done. The patented cleaning method TubeMaster AS was able to successfully clean tubes of 8 meters of tube bundle heat exchangers using only 6.5 bar jet pressure. The […]
Practical example JetMaster easily cleans considerable limescale residues from coated hybrid coolers The sensitive fins of the seven consecutively positioned coolant lines were heavily coated with lime residues. The visible surfaces looked relatively clean due to previous cleaning attempts. One of these cleaning attempts was obviously carried out with the use of chemicals. However, almost […]
Digitalization in the craft trades, is that possible? The Federal Office for Economic Affairs and Export Control’s support programme for initiating energy savings with the aid of smart meters (Einsparzähler) provides the opportunity to do this.