Modern
industrial cleaning

Food Industry

Application examples from the food industry sector

Application for JetMaster from mycon GmbH in the Food Industry. The picture shows a typical cooler in a coldstore.

The JetMaster combination system also removes massive residues from sensitive fins.

 

 

 

 

 

 

To the left: cooler before cleaning

To the right: cooler after cleaning.

Application examples

Copper finned heat exchanger before cleaning with JetMaster

Copper finned heat exchanger after cleaning with JetMaster

Cleaned Table cooler

JetMaster also removes hard deposits

Decoating of a ceiling in the food industry using the PowerMaster System

Air inlet grills before and after cleaning

Cleaning of cooling towers

The pipes in the cooling tower were temporarily supplied with lime-containing water. As a result, a hard limestone armour had developed around the pipes.

The JetMaster combination system successfully cleaned the outer pipe surfaces.

The zinc coating – which had been destroyed by chemical cleaning – is not attacked by JetMaster.

Exterior view of a cooling tower with removed lime deposits

Removed lime during cooling tower cleaning with the JetMaster combination system

Cooling tower pipes after cleaning

Cleaning of a cooling plant

Cleaning of trickling filters of the cooling unit shown above in installed condition

Cleaning of trickling filters of a cooling plant in disassembled condition

The entire JetMaster combination system (incl. JetPower) is used for cleaning surfaces with limescale residues. More information about the JetMaster combination system can be found on our JetMaster product page.