Cleaning with dry ice

IceMaster, the effective blasting system for manual and automated dry ice cleaning and dry snow cleaning of surfaces of any kind, works only with compressed air and liquid CO2. The dry ice or dry snow particles are produced directly in the blasting gun during blasting operation. All IceMaster systems offer residue-free cleaning, including parts cleaning, down to the dissolved dirt particles. The use of IceMaster systems is extremely environmentally friendly. The liquid CO2 used is usually recovered from industrial waste gases. It is a secondary use that does not increase the worldwide amount of CO2, with the exception of the additional CO2 quantities resulting from recovery and transport. The IceMaster system can be automated almost without limitation.

Mycon bietet mehre Geräte an für die jeweiligen Anforderungen

IceMaster XSP and the automatable version IceMaster SP achieve very good cleaning power with hard particles and a massive nozzle jet for residue-free dry ice cleaning/dry snow cleaning and deburring of surfaces and parts.

IceMaster XLM and the automatable version IceMaster LM clean more gently and can be adjusted very sensitively.

IceMaster XLC and the automatable version IceMaster LC clean gently and with a low use of compressed air and liquid CO2. The systems are often used to clean plastic parts in preparation for subsequent painting.

IceMaster ACB can also be used for manual and automated applications for residue-free cleaning of small parts, e.g. in the electronics sector.

IceMaster AL works exclusively with liquid CO2, which forms both the propellant jet and the solid particles of dry ice/dry snow. IceMaster AL is suitable, for example, for cooling and residue-free cleaning of e.g. welding seams and for cleaning all soiling that can be easily dissolved by ultra-low temperatures (e.g. thin silicone adhesions).